Compound Bow Concept XTS 40 Hoyt

Product description

The Hoyt Concept XTS 40 is a target compound bow based on the successful Concept X platform.
The 40-inch axle length offers a particularly stable platform for precise target shooting.
The proven geometry has been further developed with the new SCTR 2.0 cam system and the XTS tuning system.

Features

• XTS tuning system for horizontal and vertical fine tuning
• SCTR 2.0 cam system with optimised draw curve
• Shoot-through riser for high stability
• Modular grip system for individual adjustment
• Various cam modules to tune the draw behaviour

XTS tuning system
The XTS tuning system allows precise tuning of the bow directly via the limb pockets.
The system works with adjustable wedges whose position is changed via an adjustment screw.
This allows the load on the corresponding limb to be finely adjusted.

The two limb pockets take on different functions:

• Lower limb pocket: Correction of lateral deviations, i.e. tail left and tail right in the paper test
• Upper limb pocket: Correction of vertical deviations, i.e. tail high and tail low in the paper test

Both adjustments can be made independently of each other and combined.
This allows horizontal and vertical deviations in the paper test to be corrected in a targeted way.

Milled-in scales make it possible to track changes exactly and to restore settings later.
After tuning, the position is fixed with a locking screw.

XTS is not only intended for the classic paper test.
Hoyt lists paper tuning, bareshaft tuning, group tuning and the fine-tuning of aiming behaviour and holding weight as possible uses.
A bow press is not required for adjustment via the XTS system.

SCTR 2.0 cam system
The new SCTR 2.0 cam system has been revised compared with the previous SCTR system.
The force curve has been made smoother at the start and at the end of the draw.
At the same time, the system stores more energy and, according to Hoyt, achieves up to 4 fps more speed.

Various modules are available for tuning:

• The new TDM module covers positions A to E in steps of 1/2 inch and enables a more linear draw curve.
• The familiar CDM and Spec modules continue to be used and enable different draw characteristics and setups.

Modular grip system
The grip angle can be adjusted using interchangeable grip plates.
Hoyt offers the angles 0°, +4° and +8°.

Each angle is also available as a variant that reduces the draw length by 1/8 inch. This allows grip position and effective draw length to be adapted very finely to the archer.

Technical data

• Manufacturer: Hoyt
• Model: Concept XTS 40
• Product type: Target compound bow
• Axle length: 40 inches = approx. 101.6 cm
• Brace height: 7.25 inches = approx. 18.4 cm
• Speed: up to 329 fps ATA
• Weight: 5.15 lbs = approx. 2.34 kg
• Cam system: SCTR 2.0
• Tuning system: XTS tuning system
• Draw length with CDM module: 27 to 30 inches
• Draw length with Spec module: 26 to 32 inches
• Riser: Shoot-through riser
• Grip system: Hoyt Modular Grip System
• String and cable: WireWRX

Scope of delivery

• 1x Hoyt Concept XTS 40 compound bow in the selected version

Note
For optimal tuning, draw length, draw weight, cam module, arrow setup and basic settings should first be set up to suit the archer.
The XTS system is then used for targeted fine tuning.